Shark 100B Especificaciones descargar pdf (Pagina 56)

Electro Industries/GaugeTech

Doc #: E145701 5-6

55..11..33..11::

UUssiinngg

tthhee

UUnniiccoomm

22550000

The Unicom 2500 provides RS485/RS232 conversion. In doing so it allows a Shark 100 with the

RS485 option to communicate with a PC. See the Unicom 2500 Installation and Operation Manual

for additional information.

Figure 5.8 illustrates the Unicom 2500 connections for RS485.

Figure 5.9: Detail of “Jumpers”

Figure 5.8: Unicom 2500 with Connections

The Unicom 2500 can be configured for either 4-wire or 2-wire RS485 connections. Since the Shark

100 uses a 2-wire connection, you need to add jumper wires to convert the Unicom 2500 to the

2-wire configuration.

As shown in Figure 5.9, you connect the “RX -” and “TX -” terminals with a jumper wire to make

the “B(-)” terminal,and connect the “RX +” and “TX +” terminals with a jumper wire to make the

“A(+)” terminal.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 113 114

Sin comentarios

Shark 100B Especificaciones Pagina 56